integrated photosensors 1 publication date: august 2001 shg00037aed CNZ1413A (on1413a) integrated photosensors overview CNZ1413A are ultraminiature, highly reliable transmissive photosensors consisting of a high-efficiency gaas infrared light emitting diode chip that is integrated with a high-sensitivity si- integrated-photodetector chip in a double molded resin package. features ? ultraminiature: 4.2 mm 4.2 mm (height: 5.2 mm) ? fast response: t phl = 2.5 s, t plh = 6 s (typ.) ? highly precise position detection (slit width: 0.3 mm) ? gap width: 1.2 mm ? with attachment positioning pin absolute maximum ratings t a = 25 c unit: mm parameter symbol rating unit input (light reverse voltage (dc) v r 6v emitting diode) forward current (dc) i f 50 ma power dissipation * 1 p d 75 mw output output current i o 20 ma (photo ic) output voltage v o 30 v supply voltage v cc 17 v power dissipation * 2 p c 200 mw temperature operating ambient temperature t opr ? 25 to + 85 c storage temperature t stg ? 40 to + 100 c note) * 1: input power derating ratio is 1.0 mw/ c at ta = 25 c * 2: output power derating ratio is 2.67 mw/ c at ta = 25 c pin connection sec. a-a' a a' *3.2 *2-1.27 1 2 3 4 5 3-0.5 2-0.25 4.20.1 1.2 0.5 (r0.1) +0.15 ? 0 4.2 3.00.05 (0.3) 3.0 (1.0) 5.2 4.0 min. (1.5) device center not soldered 1.0 max. 2- 0.80.05 gate the rest 0.3 max. 1: anode 4: v o 2: cathode 5: gnd 3: v cc (2-c0.3) (2-c0.3) (note) 1. tolerance unless otherwise specified is 0.2 2. ( ) dimension is reference 3. * is dimension at the root of leads 4. burrs should be less than 0.15mm const. voltage cir. CNZ1413A (normally on type) 3 v cc 4 v o 5 gnd anode 1 cathode 2 note) the part number in the parenthesis shows conventional part number. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
CNZ1413A 2 shg00037aed parameter symbol conditions min typ max unit input forward voltage (dc) v f i f = 20 ma 1.2 1.4 v characteristics reverse current (dc) i r v r = 3 v 10 a output high output current i oh v cc = 5 v, v oh = 30 v, i f = 0 ma 100 a characteristics low output voltage v ol v cc = 5 v, i ol = 20 ma, i f = 5 ma 0.15 0.4 v operating power voltage v cc 4.5 17 v low-level supply current i ccl v cc = 5 v, i f = 5 ma 2.4 5 ma high-level supply current i cch v cc = 5 v, i f = 0 ma 0.8 3 ma transfer threshold input current i fh ? l (i fl ? h ) v cc = 5 v 5 ma characteristics hysteresis i flh /i fhl (i fhl /i flh ) v cc = 5 v 0.7 response time t phl (t plh ) * v cc = 5 v, i f = 5 ma, i l = 1 k 1 / 2 2.5(3.5) s t plh (t phl ) * v cc = 5 v, i f = 5 ma, i l = 1 k 1 / 2 6(5) s electro-optical characteristics t a = 25 c note) 1. normally on type characteristics is shown, ( ) shows normally off type 2. * : switching time measurement circuit (input pulse) (output pulse) t phl t plh 1.5v v ol v oh 50% sig. out t phl : h l propagation time t plh : l h propagation time r l = 1 k? v cc sig. in const. voltage cir. 50 ? ? important information for soldering 1. soldering position 2. solder temperature and soldering time temperature: 260 c or less time: within 3 seconds note) avoid using reflow soldering methods. 3. other issues 1) soldering should not create excessive thermal or mechanical stress on the case package or leads. excessive stress may cause changes in the shape or characteristics of the package or leads. 2) be careful not to allow solder, flux, solvents, etc. to remain on the case package. doing so may cause problems related to transmission characteristics, etc. soldering bath a a: make sure the distance is 0.1 mm or more. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
CNZ1413A 3 shg00037aed 60 50 40 30 20 10 ambient temperature t a ( c ) 0 20406080100 0 ? 25 i f ? v f 60 30 20 10 50 40 forward voltage v f (v) forward current i f (ma) 0.4 0.8 1.2 1.6 2.4 2.0 0 0 t a = 25 c v f ? t a 1.6 1.2 0.8 0.4 ambient temperature t a ( c ) forward voltage v f (v) 0 20406080100 0 ? 40 ? 20 i ft ? v cc 120 100 80 60 supply voltage v cc (v) relative threshold input current i fhl , i flh (%) 5 101520 40 0 t a = 25 c i ft ? t a 160 120 80 40 ambient temperature t a ( c ) relative threshold input current i fhl , i flh (%) 0 20406080100 0 ? 40 ? 20 v cc = 5 v 0 20406080100 ? 40 ? 20 v cc = 5 v v ol ? t a 0.20 0.15 ambient temperature t a ( c ) low level output voltage v ol (v) ? 20 0 20 60 80 40 100 0.10 ? 40 v cc = 5 v i ol = 20 ma i ccl , i cch ? t a ambient temperature t a ( c ) l. supply current , h. supply current i ccl , i cch (ma) 3 2 1 0 t phl , t plh ? i f 12 8 6 4 2 10 forward current i f (ma) response time t phl , t plh (s) 5 1015 2530 20 35 0 0 v cc = 5 v t a = 25 c r l = 1k ? i f , i o ? t a forward current , output current i f , i o (ma) detecting position characteristics 120 80 60 40 20 100 distance d (mm) relative output current i o (%) 234 0 1 v cc = 5 v t a = 25 c i f = 5 ma criterion 0 i f i o 10 ma 1 ma i f = 50 ma i fhl (i flh ) i flh (i fhl ) i flh (i fhl ) i fhl (i flh ) i ccl i cch t plh t phl d = 0.04 mm d maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
request for your special attention and precautions in using the technical information and semiconductors described in this book (1) if any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) the technical information described in this book is intended only to show the main characteristics and application circuit examples of the products, and no license is granted under any intellectual property right or other right owned by our company or any other company. therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) the products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). consult our sales staff in advance for information on the following applications: ? special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the prod- ucts may directly jeopardize life or harm the human body. ? any applications other than the standard applications intended. (4) the products and product specifications described in this book are subject to change without notice for modification and/or im- provement. at the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date product standards in advance to make sure that the latest specifications satisfy your requirements. (5) when designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. otherwise, we will not be liable for any defect which may arise later in your equipment. even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (esd, eos, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. when using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) this book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of matsushita electric industrial co., ltd. caution for safety danger this product contains gallium arsenide (gaas). gaas powder and vapor are hazardous to human health if inhaled or ingested. do not burn, destroy, cut, cleave off, or chemically dissolve the product. follow related laws and ordinances for disposal. the product should be excluded from general industrial waste or household garbage. if you have any inquiries or questions about this book or our semiconductor products, please contact one of our sales offices listed on the back or semiconductor company's department. maintenance/ discontinued maintenance/discontinued includes following four product lifecycle stage. planed maintenance type maintenance type planed discontinued typed discontinued type please visit following url about latest information. http://www.semicon.panasonic.co.jp/en/
|
